Jasco 1 Qt Varnish And Stain Remover (QJBV00102) - 6 Pack
This item can be purchased on-line, however, due to shipping restrictions, ITEM PICKUP IS ONLY AVAILABLE AT YOUR LOCAL ACE STORE.
- 1 Quart
- Specially formulated for antiques and fine furniture
- Safe on all wood surfaces
- Pulls red and brown wood stains
- Semi paste clings to vertical surfaces
- Works longer, wipes off clean
- Removes multiple layers of lacquer, shellac and varnish
- Effectively pulls stain from wood using water wash technique
- Indoors only with adequate ventilation
- Not for use on plastic, synthetics or fiberglass
30-Day Return Guarantee
We want you to be fully satisfied with every item that you purchase from www.acehardware.com. If you are not satisfied with an item that you have purchased (excluding Gift Cards and gas-powered outdoor equipment*), you may return the item up to thirty days after the original purchase date to receive a store credit (less shipping, handling and other charges). We recommend that you make returns of online purchases to an Ace retail store near you which will issue your store credit. If you do not have an Ace retail store near you, please contact a Customer Service Specialist by calling 1-866-290-5334 for complete return instructions. Please refer to our Return Instructions for more information about returning a purchase.
The item must be returned in good condition, in original boxes (whenever possible), and with all paperwork, parts and accessories to insure full credit. After 30 days, please contact the manufacturer directly.
*Gas-Powered Outdoor Equipment cannot be returned once gas or oil has been put in it, even if the Equipment has been drained of these materials.
What people are saying
Reviewed by 1 customer
Displaying review 1
- Flat surfaces
Comments about KLEAN-STRIP Jasco® Varnish & Stain Remover (QJBV00102) - 6 Pack:
Read directions carefully...you cannot paint this stuff on. You have to dab it on thick so you can create a seal between the product and the wood surface; otherwise it will start to evaporate and won't work. You need to leave it dwell for at least 20 minutes if removing poly and stain, and you may need to re-treat. Watch out, because it will raise the grain of the wood, and you will need to sand afterwards. I wasn't really happy with this product and will probably be picking up something else.