1 Tool, 3 Ways To Use It – Power Drill

If you’re looking to add a Power Drill to your tool set, then we’ve got the video to get your familiar with this versatile tool. Watch as Lou Manfredini, Ace’s Home Expert, shows you three ways to use a Power Drill.

Cordless drills, or cordless screw gun, have many different features. The Craftsman Cordless Power Drill has multiple speeds and multiple directions that you can control using the lever. It also has a clutch used when using a screw gun or drilling. You would set the clutch to drill bit. Setting it on speed level 1 gives you more strength and torque. Setting speed level 2 gives you more speed.

Power Drill

Place the drill bit inside and then tighten the chuck until it clicks
Turn the drill to the higher speed and drill setting.
In the forward position, set it to the object you would like to drill and pull the trigger, turning on the drill

Power Screw Driver

Attach a screw bit and tighten the chuck
There are multiple attachments you can use for this
Set the speed to 1 or a lower speed with more torque
Set the clutch to how deep you want the screw to go
Put screw to material and turn it on
Drill in screw until you hear the tool rattle, and the drill bit stops turning

Power Sander

There are different attachments you can use for this tool to sand or finish projects
There are grinding wheels, finishing wheels, and even sanding wheels
For sanders you can go on either speed
Make sure the sander runs in the direction on the side the sand paper is

Always follow manufacturer's instructions before using any product.

For more helpful tips and advice, visit a neighborhood Ace or visit us online at acehardware.com

These “How-To’s” are provided for informational purposes only. The information contained in Ace Hardware’s “how-to” videos and/or articles is intended to provide general guidelines for projects in and outside of your home. Tools, products, materials, techniques, building codes, local regulations are continually changing. Ace Hardware assumes no responsibility for the accuracy of the information contained herein and disclaims any liability for the omissions, errors or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project and the product being used. The viewer must always take proper safety precautions and exercise caution when taking on any project or using materials of said project. If you have any questions, concerns, or doubts regarding any element of what is displayed in the videos and/or articles, contact a licensed professional.