Bosch 1/2" Glass And Tile Bit (GT600)

Item no: 2362747 | 000346372298
160  Estimated 

FREE Store Pickup! Find my Ace. (details)
to-done LIST

at Your Local Ace

Ship to home is available. Leaves warehouse in 1 to 2 bus. days. (details)
STORE AVAILABILITY: Your neighborhood Ace stocks thousands of products in the quantities you need. Check with your local Ace for availability. (find your local Ace)
  • Material: Carbide Tipped
  • Shank Type: 3-Flat Shank
  • Drill Bit Diameter: 1/2 in.
  • Dril Bit Length: 4 in.
  • Product Type: Glass and Tile Bit
  • Number of Pieces: 1 pc.
  • Application: Bathroom/Shower Installs, For Bathroom/Shower Installation, Towel/Shower Rods

This item can be shipped to your home. Or pickup this item at your local Ace Store for FREE*.

*Items shipped from our warehouse to stores in Alaska and Hawaii will receive a 70% shipping discount.

30-Day Return Guarantee

We want you to be fully satisfied with every item that you purchase from If you are not satisfied with an item that you have purchased (excluding Gift Cards and gas-powered outdoor equipment*), you may return the item up to thirty days after the original purchase date to receive a store credit (less shipping, handling and other charges). We recommend that you make returns of online purchases to an Ace retail store near you which will issue your store credit. If you do not have an Ace retail store near you, please contact a Customer Service Specialist by calling 1-866-290-5334 for complete return instructions. Please refer to our Return Instructions for more information about returning a purchase.

The item must be returned in good condition, in original boxes (whenever possible), and with all paperwork, parts and accessories to insure full credit. After 30 days, please contact the manufacturer directly.

*Gas-Powered Outdoor Equipment cannot be returned once gas or oil has been put in it, even if the Equipment has been drained of these materials.

What people are saying

sort by:


by PowerReviews
SKIL-BOSCH POWER TOOLBosch 1/2"" Glass And Tile Bit (GT600)

(based on 2 reviews)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 2 customers

Displaying reviews 1-2

Back to top


do not use..

By glassblocks

from BC, Canada

Comments about SKIL-BOSCH POWER TOOL Bosch 1/2"" Glass And Tile Bit (GT600):

should not be used.. this does not work because of the bit is put together not right....


Very difficult to use with an extremely short life

By CraigDK

from 44202



    • Low Quality
    • Not durable

    Best Uses

      Comments about SKIL-BOSCH POWER TOOL Bosch 1/2"" Glass And Tile Bit (GT600):

      I have almost nothing good to say about the Bosch GT600 drill bit. It is easy to start a hole with a brand new bit, but very difficult and time consuming to actually drill a complete hole in the side of a normal glass block! For one thing, the bit’s instructions don’t give any guidance about water at all. We had 26 glass blocks to drill for a craft project and went through 3 of these bits during 22 attempts with 4 blocks cracking for us. If the hole completes, the drill becomes VERY difficult to control. We needed a safety board to help catch the chuck (with a 3 / 4" hole in it to provide just enough clearance for the bit and spraying water) to prevent crashing into the glass when the cut finished. We tried using a lot of water, very little, or none. We tried using different drills, one a variable speed 0 â€" 2500 RPM and the other drill set in low gear ratio with 0 â€" 1,000 RPM and both had similar results. You could get 1 or 2 good holes out of a bit if you were lucky (taking a little under 2 minutes with a fresh bit), and then it dulled and was very slow at best or shot altogether. Also, the edges of the holes were often fairly uneven and sharp. Based on some videos I found online of similar bits, I think using one of these in a drill press with precise speed control, perfect vertical alignment, plenty of water and a fixed depth stop might work- BUT for some bizarre reason Bosch’s instructions explicitly say NOT to use a drill press! We found that using a hole saw style diamond bit was MUCH easier and faster.

      Displaying reviews 1-2

      Back to top

      © 2017 Ace Hardware Corporation. Ace Hardware and the Ace Hardware logo are registered trademarks of Ace Hardware Corporation.
      HACKER SAFE certified sites prevent over 99% of hacker crime.

      Add Item to To-Done List

      To use this feature you must be signed-in to your account, please sign in now. If you do not have an account, please create an account to participate.

      Ace Rewards

      Ace Rewards is a free and rewarding membership program that lets you earn rewards with every purchase you make! Join now.