Sioux Chief 10 ft. Galvanized Galvanized Steel Hanger Strap

3/4 inch x 10 foot 28 gauge Sioux Chief galvanized steel hanger strap shall be used where necessary to support CTS, IPS or DWV pipe. Metal strap shall be made with galvanized steel and installed in accordance with national codes pertaining to hanger spacing and slope requirements. Metal hanger strap shall feature 1/4 inch or 3/16 inch pre-drilled pilot holes in alternating pattern and strap shall be 3/4 inch wide.Wear gloves and eye protection when handling metal hanger strap to avoid injury. Cut hanger strap to desired length. Using approved hardware (not provided), secure hanger strap with nail or screw to joist or stud member. Hanger strap may be looped or double wrapped around piping and may be installed on same side or opposite sides of floor joists or stud members.