Dricore Plastic Crack Surface Paste 2 in. D

The Dricore concrete repair system has been specifically designed and engineered to seal, fill and structurally reinforce concrete cracks. This 3-step system includes: step 1 crack prep surface paste, step 2 crack injection expanding foam and step 3 the carbon fiber reinforcement kit. Dricore pro concrete repair crack prep surface paste is a two-component, 100% solids, moisture-insensitive, high strength, high modulus, multi-purpose liquid epoxy gel adhesive. It meets the current ASTM C881 and AASHTO M235 types I, II, IV and V grade 3, classes B and C specifications. It has passed 4 million cycles of simulated seismic tension test. Use Dricore pro concrete repair crack prep surface paste as an adhesive for setting/bonding subsurface or external reinforcements to concrete masonry or other substrates. It can also be used for reinforcing steel dowels, threaded rods, bolts and inserts into existing concrete. Use as a multipurpose bond adhesive for structural bonding fresh or hardened concrete to hardened concrete, sealing cracks, setting Rhino injection ports prior to injection grouting, and as a pick-proof sealant. Dricore pro concrete repair crack prep surface paste is an ideal bonding agent for multiple surfaces including concrete, brick, stone, block and metal. Surfaces must be clean and profiled or textured. New concrete must be a minimum of 28 days old. All dirt, oil, debris, wax, grease or dust must be removed. Prepare the surface mechanically using a scarifier, sandblast, shot blast, bush hammer or other equipment that will give the surface profile needed for the application. Clean tools and equipment with mighty wipes by Dricore, a biodegradable formula, that removes and neutralizes the epoxy. Do not allow epoxy to harden on equipment as cured material can only be removed mechanically.