Price
$1,229.99
Pickup
 
  
Delivery
 
 
From:
 
add to cart Image

Free returns on most items within 30 days.

Product Overview

Sealed-Combustion model, Glass-lined tank, premium grade anode rod protects against tank corrosion, 2" Non-CFC foam insulation, factory installed temperature and pressure (T&P) relief valve, factory installed 3/4 inch PEX polymer-lined nipples allow easy water connection hook-up, heater application typically for installation within an interior (inside) closet with hole in floor that allows outside air supply for fuel combustion, air-supply piping not provided by factory, in addition, Roof Jack vent kit Ace 4736756 (sold separately, but required accessory), Ace 4736756 is required whenever selling either Ace 4588604 or 4588661, vent piping connects directly on top of heater without use of drafthood, must be installed in accordance with instructions furnished with the heater, No other Roof Jack Kits are approved for installation with this heater, 18" Diameter, 58" to Top of Heater Jacket, No Draft Hood Venting Allowed, .59 Uniform Energy Factor (UED), READ and Understand INSTRUCTION MANUAL BEFORE INSTALLATION, Qualified and trained professional installer of mobile-housing heaters highly recommended, NOTE: Contact Local Gas Utility Company provider for installations above 5,400 feet
  • What's Included: 30-gallon storage tank mobile or manufactured house water heater, sealed-combustion inside room or closet install only, factory installed temperature & pressure (T&P) relief valve, Diffuser-End Pex Dip Tube, anode rod, inlet and outlet water connection th
  • IMPORTANT NOTE: For indoor/closet use. 60 gallon first hour rating gallons (UED)
  • 58 inch height
  • 30000 BTU input convertible control for natural or propane gas
  • Eco-friendly green choice gas burner reduces NOX emissions by 33 percent over standard burners
  • Piezo igniter allows for easy one-hand pilot ignition without matches
  • All descriptions, images, references, features, content, specifications, and product described or depicted are subject to change at any time without notice.
  • Factory-installed PEX polymer lined heat trap nipples, Factory-installed temperature and pressure (T and P) relief valve
  • Model for Inside Access installation only. Sealed combustion unit.

Specifications

  • What's Included: 30-gallon storage tank mobile or manufactured house water heater, sealed-combustion inside room or closet install only, factory installed temperature & pressure (T&P) relief valve, Diffuser-End Pex Dip Tube, anode rod, inlet and outlet water connection th
  • Brand Name: Reliance
  • Product Type: Mobile Home Water Heater
  • Amps: 0 ampere
  • Btus: 30000 BTU
  • CSA LIsted: Yes
  • Commercial or Residential: Residential
  • Depth: 18 inch
  • Diameter: 18 inch
  • Energy Star Certified: No
  • Gas Connection Size: 1/2 inch
  • Height: 58 inch
  • Maximum Elevation: 5400 foot
  • Maximum Pressure: 150 pound per square inch
  • Maximum Temperature: 155 degree Fahrenheit
  • Minimum Temperature: 55 degree Fahrenheit
  • Power Source: Natural Gas/Propane
  • Brand Name: Reliance
  • Tank Capacity: 30 gallon (US)
  • Temperature Pressure Relief Valve: Yes
  • Vent Diameter: 3 inch
  • Volts: 0 volt
  • Warranty: 6 year
  • Water Connection Size: 3/4 inch
  • Water Connection Location: Side
  • Width: 18 inch
  • Tankless: No
  • Low NOx Burner: Yes
  • Click here to see the Safety Data Sheets for this product.