UGears Harry Potter Knight Bus Mechanical Model Kit Brass 272 pc

This DIY wooden mechanical model bus is an exciting addition to the Ugears Harry Potter collection, and a very clever piece of engineering indeed. To set the bus in motion, press down the magical manipulator button while holding the bus, then let go! The Knight Bus roars off thanks to a system of gears that transfer energy from the spring to the wheels, including a flip gear that lets the bus continue coasting. The standout feature of the DIY wooden model Knight Bus is its ability to transform by narrowing or expanding its width with a twist of the magical manipulator. Twist the knob on top of the bus counterclockwise and the bus becomes narrow, for squeezing between traffic. Twist the knob clockwise to expand the bus (and any passengers) to their true size. But here's the amazing thing - as the width of the bus changes, so does the speed. In its normal (not compressed) state, the bus travels astonishingly fast. Compress the bus and an internal mechanism makes the bus travel in slow motion. The DIY model bus is rated medium difficulty has 268 pieces and an estimated assembly time of 6 hours. To assemble, just punch the pieces out of the laser pre-cut boards and snap them together. No glue or special tools required. Don't forget to sand and wax the moving parts to make your Knight Bus run smoothly (sandpaper and wax are included in the kit). Detailed, illustrated instructions are available in 11 languages. Ugears outstanding collection of mechanical 3D puzzles, DIY model kits, automatons, robots, wooden puzzle boxes, and STEM Lab model kits are enjoyed by all ages and modeling skill levels, from beginners to experienced model hobbyists.