Benjamin Moore Corotech Command Gloss Base 3 Waterborne Exterior and Interior 5 gal

Extremely durable, single-component, multi-substrate waterborne acrylic urethane ideal for facility maintenance and property management applications where minimal maintenance disruptions and quick returns to service are required. This interior/exterior, UV resistant acrylic urethane enamel provides superior adhesion and abrasion resistance on a variety of substrates. Corotech Command is an extremely durable, single component, multi-substrate solution to help you save time and tackle multiple jobs with confidence. This interior/exterior, UV-resistant acrylic urethane enamel provides superior adhesion and abrasion resistance on a variety of substrates, and is ideal for facility maintenance and property management applications where minimal maintenance disruptions and quick returns to service are required. For best results, prime bare spots and new wood with a quality acrylic primer. Apply one or two finish coats of Command as needed. Command can also be used as a self sealing topcoat, however, may dry to an uneven finish on some species of wood. Allow new concrete to age for a minimum of 30 days. New or old unpainted concrete should be etched with a concrete etch solution and then rinsed thoroughly with water. Glossy surfaces and/or existing alkyd finishes, must be deglossed to obtain a surface profile prior to coating. The preferred method is thoroughly sanding the surface area. Areas that cannot be properly deglossed should be primed with Corotech waterborne bonding primer V175 prior to finish coating.